Overview
Introduction
Perpetual futures, or perps, are crypto derivatives that let you go long or short on an asset like Bitcoin without owning it, and they never expire. That combination has made them one of the most widely used products in crypto markets.
Funding payments move money between longs and shorts at set intervals, though, and every position has to hold enough margin to stay above the exchange's maintenance threshold. Once equity falls below that level, the risk engine closes the trade automatically, wherever you expected the price to go next.
What Are Perpetual Futures in Crypto?
A perpetual futures contract tracks the price of an asset such as Bitcoin (BTC) or ether (ETH). Go long and you profit when the contract price rises. Go short and you profit when it falls.
Standard futures expire on a fixed monthly or quarterly date, so traders have to close or roll their positions on that schedule. Perps drop the deadline, which is where the name comes from, so a position can stay open for as long as the account meets margin requirements and you're willing to keep paying, or collecting, funding.
Neither condition resets, though, and both apply for as long as the trade stays open. If account equity slips too close to the maintenance margin threshold at any point, the position can be liquidated. And if funding moves against you during a sideways market, your collateral shrinks even when the price goes nowhere.
A perp position also puts no BTC, ETH, or other coin in your wallet. It creates account-level exposure that rises and falls with the contract price, under the exchange's margin system and rules. So holding a perp means managing price exposure, collateral, and liquidation risk, with no underlying coin to fall back on.
How Perpetual Futures Stay Near Spot
A dated future converges on spot because it has to settle at expiry. Perps have no settlement date, so funding does that job. Funding payments make one-sided positioning expensive when the contract price drifts above or below the underlying market, and arbitrage traders step in once the gap is wide enough to profit from.
Each of the three prices and three rules behind a perp does a single job, from tracking spot to deciding who pays funding and when a position gets closed.
- Index price
Tracks the underlying spot market the contract refers to.
- Perp price
Shows where traders are buying and selling the contract.
- Mark price
Gives the risk engine a fair price for margin and liquidation checks.
- Funding payment
Moves money between longs and shorts to discourage a lasting premium or discount.
- Margin requirement
Sets the collateral needed to open a position and keep it open.
- Liquidation trigger
Reduces or closes the position when equity falls too far.
Exchanges check liquidations against the mark price, which shields a healthy position from a brief spike on a thin order book. Hyperliquid, for instance, builds its mark price from centralized exchange prices combined with the state of its own order book. The flip side is that a position can reach its liquidation price while the last traded price still looks comfortable.
While you hold a perp, track the index price, the contract price, the direction of funding, and your account equity against the maintenance margin threshold together.
All of this holds up as long as market makers, arbitrage traders, and risk engines keep the spread under control. The perp price can swing sharply in volatile markets, though, and funding can flip quickly. A wave of liquidations can then push the contract well away from the spot price of the same coin.
Funding Rates: Who Pays and Who Receives
Funding rates are periodic payments between long and short traders in a perp contract. When the perp trades above the index, longs usually pay shorts. When it trades below, shorts usually pay longs.
The payment is sized on the full position value. When that position is many times your margin, a charge that looks tiny as a share of the contract can eat up a large part of your account.
Many centralized exchanges settle funding every 8 hours, although Bybit switches a contract to hourly settlement once its funding rate reaches a preset upper or lower limit. Hyperliquid pays every hour, at one-eighth of the 8-hour rate. Cboe's continuous futures take another route, with a daily cash adjustment tied to the underlying reference rate.
A funding reading usually hints at how traders are positioned, depending on its sign and how it moves.
- Positive funding
More traders want long exposure.
- Negative funding
More traders want short exposure.
- Rising funding
Positioning may be getting crowded on one side.
- A funding gap between exchanges
Exchange rules, liquidity, demand for borrowed exposure, or the trader mix may differ.
- High funding with rising open interest
Traders may be stacking up oversized positions before a sharper move or squeeze.
Funding describes positioning and makes no forecast. A high positive rate doesn't mean Bitcoin is about to fall, and a negative rate doesn't mean a short squeeze is coming. Rates can stay elevated for long stretches while a trend continues.
Use a live dashboard for the current BTC perpetual futures funding rate, since any figure printed in an article goes stale within hours. CoinGlass collects live BTC perp rates from the major exchanges. Check the timestamp, compare rates across exchanges, note when the next payment falls, and look at open interest and crypto liquidation data next to the rate.
Rates differ across Binance, OKX, Bybit, Kraken, Coinbase, Cboe's continuous futures, and on-chain exchanges, because each one has its own liquidity, collateral rules, contract design, eligibility criteria, and trader mix.
Coinbase brought perpetual-style futures regulated by the US Commodity Futures Trading Commission (CFTC) to eligible US customers through Coinbase Financial Markets on Jul. 21, 2025. Coinbase Derivatives now lists nano Bitcoin, nano Ether, nano XRP, and nano Solana perps. Eligibility, margin requirements, and account protections still depend on the exact product and exchange.
What’s the Difference Among Spot, Margin, Dated Futures, and Perps
Spot, margin, dated futures, and perps all give you crypto price exposure, but each handles ownership, expiry, borrowing, and liquidation in its own way. The sharpest split is between owning and borrowing. A coin you own can fall in value, while a derivative held on margin can be closed by the exchange before you decide to exit.
Spot trading means buying or selling the asset itself. A spot BTC buyer holds BTC after settlement, with full downside exposure and no liquidation short of the coin going to zero. Margin spot adds borrowing on top. You still trade the asset, but now you also pay interest, post collateral, and face forced repayment if the price moves against you.
Dated futures and perps are both contracts, so no coin changes hands. Dated futures settle on a fixed calendar date, which makes them predictable, though rolling into the next contract costs money if you want exposure past expiry. Perps remove that date and use funding to keep the price in line.
Each product gives you something and costs you something in return.
- Spot crypto
You own the asset directly, with full exposure to any price drop.
- Margin spot
Borrowed buying power, with interest costs and liquidation risk.
- Dated futures
A clear expiry and settlement, with roll costs if you want to stay exposed.
- Perpetual futures
No standard expiry, with ongoing funding and liquidation risk.
- Contracts for difference (CFDs)
Contract exposure on broker-specific terms, with legal limits on who can access them.
A spot trade can still lose most of its value, and a dated future can bring sharp risk around settlement. A perp looks flexible because it never expires, yet margin requirements can close the position long before your view on the market has time to play out.
Many crypto exchanges put spot, margin, and derivatives in one account, with perps on the derivatives side.
Longs, Shorts, Leverage, Margin, and Liquidation
Opening a perp position means picking a direction, posting collateral, and accepting that the exchange can reduce or close the position if account equity drops below the maintenance margin threshold.
A long profits if the contract price rises by more than your costs, and a short profits if it falls by more than your costs. Leverage multiplies the position size relative to the margin you post, which raises your upside exposure and also the speed at which a bad move eats into the account.
Margin works at two levels. Initial margin is the collateral needed to open the position, and maintenance margin is the minimum equity needed to keep it open. The liquidation price is the approximate contract level at which the risk engine starts reducing or closing the position.
Several risks tend to surface before an account looks obviously stressed.
- The mark price can reach the liquidation threshold while the last traded price still looks safe.
- Cross margin puts all the collateral in the account at risk, beyond the margin assigned to one position.
- Stop orders can slip or fail to fill in fast markets.
- A partial liquidation can shrink the position and still leave the rest exposed.
- Auto-deleveraging can close part of a profitable trader's position if the insurance fund can't absorb a losing counterparty's deficit.
Insurance funds and auto-deleveraging act as backstops, and neither one is a guarantee. An insurance fund covers losses from bankrupt positions up to its balance. Once losses exceed that balance, auto-deleveraging passes the rest to profitable traders on the other side.
Worked Example: $1,000 Margin at 2x, 10x, and 40x
Hyperliquid sets initial margin at one divided by the leverage you choose, so a 10x position needs 10% of its value up front. Maintenance margin is half the initial margin at the asset's maximum setting, and Bitcoin positions up to $150 million can go to 40x, so maintenance margin there works out to 1.25%.
Now take a hypothetical $1,000 of isolated margin behind a BTC long. At 2x, the position is worth $2,000 and liquidation arrives after a price drop of about 49.4%. A 10x position of $10,000 is liquidated after a drop of about 8.9%, and a 40x position of $40,000 lasts only until the price falls about 1.3%.
Funding is charged on that full position value. Hyperliquid's funding equals its fixed interest component of 0.01% every 8 hours when the perp trades at no premium, and longs pay it. Over 30 flat days, that adds up to 0.9% of the position, or $18 at 2x, $90 at 10x, and $360 at 40x. At 40x, those payments take more than a third of the margin and move the liquidation trigger from a 1.3% drop to a drop of about 0.35%.
Same $1,000 margin, three leverage settings
A hypothetical $1,000 isolated BTC long shows how 2x, 10x, and 40x leverage shrink the price drop that triggers liquidation and raise the share of margin that funding takes over 30 flat days.
Higher leverage cuts the distance to liquidation and makes funding, which is charged on the full position, eat a much larger share of the margin.
Hypothetical position and flat price. Funding assumes zero premium, so the rate equals the fixed interest component. Trading fees, slippage, the exact oracle price, and margin tiers above 150 million USDC are left out. Other exchanges use different margin and funding rules.
What Perpetual Futures Are Used For
The same perp contract can serve very different goals, depending on how you pair it with spot holdings, what collateral backs it, and how long you plan to hold it. Each common use also comes with its own cost.
- Directional trading uses borrowed exposure to bet on price, but losses grow with position size and speed up as the price nears liquidation.
- Hedging can reduce exposure on a spot portfolio, though the hedge itself can be liquidated in a brief spike against it.
- Funding-rate trades collect periodic payments from the other side, but only while the rate and spread stay favorable.
- Basis trades capture the price gap between spot and the perp, and they depend on execution quality, fee levels, and stable collateral.
- Market making earns the spread between bids and offers, which takes inventory management, fast execution systems, and a reliable exchange.
A setup that works in spot can behave very differently once funding costs and liquidation risk are added to the same price move, so perps don't suit every active trader.
How Perps Shape Crypto Markets Beyond One Position
Large perp markets trade alongside spot markets in the same coins, so positioning in derivatives can feed back into spot prices through hedging flows and arbitrage.
Open interest measures the total value of contracts still open. When it rises, more borrowed exposure is building up, and if much of it points one way, a reversal can force closures that amplify the move. Funding rates show which side is paying for exposure, while liquidation maps show where forced closures may cluster around specific price levels.
These signals mean most in combination, and each one raises a question to answer before you act on it.
- High positive funding
Is open interest rising too?
- High negative funding
Are shorts crowded, or is spot demand weak?
- Rising open interest
Are the new positions directional or hedged?
- Liquidation clusters
Could nearby price levels force closures?
- Wide basis
Do fees, funding, and execution costs cancel out the spread?
No single signal should decide a trade. Open interest can climb because hedged market makers are busy, with few new directional bets behind it, and liquidation heatmaps mark risk zones without predicting that the price will reach them.
Forced long liquidations can set off cascading selling, and short squeezes can force buying through derivatives positioning. Both pass through each exchange's own risk engine, and for a while they can move a perp market apart from spot demand.
Centralized Perps vs. On-Chain Perp DEXs
Centralized exchanges and on-chain perp decentralized exchanges (DEXs) both offer contract exposure on margin, but they differ in who holds your funds, how orders are matched, and what happens when something breaks. A centralized exchange manages accounts, order books, margin, and liquidation inside its own systems. An on-chain exchange connects wallet users through smart contracts, oracles, liquidity pools, or decentralized order books.
Centralized exchanges usually have more liquidity and faster matching, though you rely on the exchange for custody, withdrawals, account access, and the integrity of its risk engine. On-chain exchanges reduce some of that custody dependence and bring their own exposures, including wallet signing, reliance on price oracles, smart-contract risk, bridge risk, and thinner liquidity.
Neither model is safer by default. Four designs are common, and each pairs an advantage with its own risk.
- Centralized exchange perps
Fast matching and account tools, with custody and eligibility risk.
- On-chain order-book perps
Wallet-based access, with smart-contract and liquidity design risk.
- Oracle and pool-based perps
On-chain settlement, with price-feed and pool liquidity risk.
- Hybrid designs
More flexible infrastructure, with more moving parts to understand.
Hyperliquid, dYdX, GMX, Drift, and Synthetix each take their own approach. Some use order books similar to centralized exchanges, while others rely on pooled liquidity, oracle prices, or synthetic exposure. The Hyperliquid exchange review covers one of the more established on-chain perp platforms in detail.
Self-custody doesn't remove liquidation risk. A wallet-based account gets liquidated just like a centralized one once the position breaches margin rules, and on-chain positions also face oracle delays and failed transactions.
Access to centralized exchanges varies by jurisdiction as well. Some allow spot trading in a region while blocking derivatives or capping borrowed exposure there, and eligibility can also change with account type, so check the specific product page before you fund an account.
How to Compare Perpetual Futures Exchanges Before Opening an Account
The highest leverage cap is a poor way to pick an exchange. A higher maximum only lets you open positions closer to liquidation, which works against you, especially if derivatives are new to you.
Read the product page and risk disclosures before you fund an account. They should confirm that the contract is available where you live, which collateral is accepted, how funding is calculated, and when liquidation is triggered.
Work through this list for each exchange you consider.
- Confirm the product is available in your jurisdiction.
- Check the margin requirements for the exact contract.
- Review supported collateral and any stablecoin risk.
- Compare the funding interval, cap, and formula.
- Check maker, taker, settlement, and withdrawal fees.
- Check how much the order book can absorb at your expected trade size.
- Understand how the mark price and index price are built.
- Read the insurance fund and auto-deleveraging rules.
- Test deposits and withdrawals before sizing up.
If you want futures-style access, start with the crypto futures exchanges and crypto derivatives exchanges we rank, ahead of a general exchange search. Once you understand the product-level risk, individual reviews such as the OKX exchange review or Bybit exchange review help you compare specific platforms.
Perpetual Futures Risk Checks Before You Trade or Hedge
Before you open a perp position, ask whether it can survive an adverse price move, funding costs, and exchange-specific failures over the whole period you plan to hold it. That means checking margin headroom, liquidity, operational risk, and whether the account uses isolated or cross margin.
Even a small position with plenty of margin can fail if you ignore funding or if cross margin exposes collateral you need elsewhere.
The checks below apply to new and open positions alike.
- Know the liquidation price before you enter.
- Pick isolated or cross margin for a specific reason.
- Estimate the total funding cost over the full planned holding period.
- Keep spare collateral in a separate account, away from forced liquidation.
- Place stops on the assumption that they may slip in a fast market.
- Check liquidity at the size you plan to trade.
- Plan for exchange downtime or application programming interface (API) outages, especially around major price events.
- Review wallet approvals and signing requirements on any on-chain exchange.
- Track oracle, bridge, and smart-contract exposure separately from price risk.
- Keep trade records for tax reporting, audits, and performance review.
Wallet-based perp positions add operational risk that account-based positions avoid. Signing workflows, hardware wallet compatibility, and bridge approvals all have to be handled correctly for the position to behave as expected.
FAQs
What are perpetual futures (perps) in crypto?
Perpetual futures are crypto derivatives that let you take long or short exposure to an asset’s price without owning the asset and without a standard expiry date. The position stays open only while it meets margin and funding requirements.
Do perpetual futures expire?
Most crypto perpetual futures have no monthly or quarterly expiry. Some regulated perpetual-style products use long-dated structures, such as Cboe’s continuous futures with expirations of up to 120 months, so read the exact contract specifications before trading.
Who pays the funding rate in perpetual futures?
It depends on whether the contract trades above or below the underlying reference market. Positive funding usually means longs pay shorts, and negative funding usually means shorts pay longs.
Where can you check the current BTC perpetual futures funding rate?
Use a live derivatives dashboard or the exchange’s own product page. Compare timestamps, exchanges, funding intervals, open interest, and liquidation data, since a single displayed number can be hours old.
Can you lose more than your margin in perpetual futures?
Yes, on some products and account setups, particularly with cross margin or with products whose risk disclosures allow deficit balances. Exchange rules, account type, and jurisdiction decide the exact treatment.
Are on-chain perpetual futures safer than exchange perps?
Not by default. On-chain perpetual futures may reduce custody dependence, but they add smart-contract, oracle, wallet-signing, bridge, liquidity, and transaction-execution risks that a centralized exchange doesn’t have.

